Decorating Tips

It’s easy: just peel and stick! When you open a package of RoomMates, you will find the designs printed onto a pre-cut liner (just like a package of regular stickers). Peel the design away from the liner and stick it to your surface of choice. Presto—you’re a decorator!

Remember to save your liners: if you want to take down your RoomMates for an extended period of time, placing them back on the liner will keep them sticky and ready to re-apply whenever you’re ready to decorate again.

As a general rule of thumb, it’s always best to test RoomMates in an inconspicuous area before applying. If the surface is textured, wet, dusty, or dirty, performance could be seriously diminished.

When applying RoomMates to painted walls:

• Prior to applying RoomMates, clean the wall and make sure it is dry and free of dust or dirt.
• Freshly painted walls should be allowed to “cure” for 10 to 15 days prior to applying RoomMates. Even if new paint feels dry, it may still need to settle and completely cure. Applying RoomMates to freshly painted walls may cause the adhesive to lose its effectiveness, which can then cause the design to peel or fall off.

If applying RoomMates to other surfaces:

• RoomMates are not recommended on ”orange peel“ textured walls.
• RoomMates will not work well on brick, cinder block, or other porous surfaces.
• RoomMates are not recommended for use on wallpaper or delicate surfaces.

If applying RoomMates in a bathroom or around water:

• RoomMates can be applied to tiles as long as the surface is clean and completely dry during installation. Make sure the design does not overlap any grout, as water could filter beneath and compromise the adhesive.
• RoomMates can be applied to shower walls as long as they are placed tightly onto the surface so water cannot reach under the design. Smooth the decal out and be sure that water cannot flow behind the design. Once applied, RoomMates will not move even if sprayed by the shower. Neat, huh?
• Do not place at the bottom or inside a bathtub. Water could filter beneath the design too easily and would compromise the adhesive.
• When cleaning the bathroom, please take care to avoid spraying any harmful chemicals on or near your RoomMates! Prolonged exposure could damage the decals, and direct contact can cause bubbling, running, or streaking.

How do I remove RoomMates wall decals?

Simply peel them off the wall. That's it!

If removing an oddly-shaped design, or a giant wall decal (in multiple pieces), try to start with the largest end or piece first. And remember to go slowly: if you pull too hard or too fast, you might rip the design!

What shouldn’t I do with my RoomMates?

• Do not place items decorated with RoomMates in a dishwater, oven, or microwave.
• Do not place RoomMates on rugs, fabrics, clothing, or any other textiles. Textile fibers may stick to the adhesive and cause it to become ineffective.
• Do not place RoomMates in areas where they will be exposed to extreme heat or cold. Very high and low temperatures can compromise the adhesive and cause decals to peel, rip, fall off, or damage the surfaces on which they have been applied.
• Do not spray RoomMates with any chemicals, cleaners, or fragrances. If the decals are dirty, they can be cleaned with a damp rag and a mild soap (if necessary).

How do I remove air bubbles?

When applying a wall decal, make sure you start from one side or the top of each element. Keep the rest of the element away from the wall or surface. Slowly go down over the design with your hand ,and smooth the element onto the surface, pressing out any bubbles as you go. Once applied, you should be able to move any remaining bubbles out by pressing/smoothing them out of the element. If the problem persists, you can punch a tiny hole with a pin to push the air out, or simply remove and re-apply.

What do I do if my decal sticks to itself?

FAQ

On this page you’ll find answers to frequently asked questions about RoomMates. If there’s something you’re looking for, you’ll find it here!

What are RoomMates made of?

RoomMates are made of a thin, flexible vinyl material. They are extremely durable and made to last for years, but are still flexible enough to be applied to a variety of surfaces.

Will RoomMates stick to textured walls?

Although we only recommend using RoomMates on smooth, flat surfaces, our customers do occasionally report success with textured walls or ceilings—the less texture, the better.

My RoomMates don’t stick! What happened?

Please carefully read our Decorating Tips prior to installation to be sure that all criteria are met.

If your decals are still falling off the wall, and you feel that you followed the instructions correctly, let us know and we'll help you out.